360 panoramic camera device connected to T704
<pre><code> Brief Instruction Of Equipment</code></pre>
<ol>
<li>Product introduction
<img src="https://www.showdoc.cc/server/api/common/visitfile/sign/e42a242f7b4444cf425c9089bf6a2c4b?showdoc=.jpg" alt="" /></li>
<li>Wire Installation
1）Insert the main cable into the 16PIN socket corresponding to the device；
2）Plug the camera cable into the corresponding interface;
3）Check if the red antenna receiving antenna is connected, make sure it is connected;
4）Connect the AV & 4PIN adapter to the AV output connector. The 4PIN plug of the AV & 4PIN adapter is inserted into the video input port of T704.</li>
<li>Power on 360 panoramic camera device and T704 vehicle device.
Use the T704 remote control to adjust the video input signal settings;
1)BASIC-Enconde-Main(In the channel where the AV & 4PIN conversion plug is inserted, select D1)
<img src="https://www.showdoc.cc/server/api/common/visitfile/sign/e365ba94d7bebd7071be729d74a6cde8?showdoc=.jpg" alt="" />
2)BASIC-Recoerd-CType(Video Norm selectPAL; In the channel where the AV & 4PIN conversion plug is inserted, Tick 960H)
<img src="https://www.showdoc.cc/server/api/common/visitfile/sign/1a8e4f59ced639bda66792fc2b9cfeaf?showdoc=.jpg" alt="" />
3) Exit the T704 display interface from the straight video display interface; Then, turn on the power switch with the infrared of the 360 panoramic camera device, and the video signal will be automatically output by the AV connector.
Complete the video signal connection of 360 panoramic camera device and T704 car device.</li>
</ol>