MONTION DETECT
<p>NOTICE:Can only be configured by connecting the mouse and the display stand-alone.
step1,upgrade the DCAM 001/2 firmware to the Version_D2020041781.</p>
<p>(you can upgrade the device by Micro SD card or upgrade the online device at the CMSV6 platform.)</p>
<p>step2,configure the parameter.
On the display, click the mouse to enter,MENU / BASIC / ALARM / MOTION DETECT
<img src="https://www.showdoc.cc/server/api/common/visitfile/sign/6ca032bfd4a456618de00cfe3d8cf0f8?showdoc=.jpg" alt="" /></p>
<p>1）set the CH you want to detect,like CH1;
2)slect ON,Open this CH function switch;
3）Select sensitivity, 1~4, increase sensitivity in turn
4）Click SETUP to select the detection area. The red area is the detection area. You can click to select the ignored area (non-red transparent area, no movement is recognized here)</p>
<p>After completing the area selection, click the right mouse button to launch the area selection，then click on the alarm interface to confirm, and then exit to complete the setting.</p>