9. Local Preset Storage Positions

<div><center></center> </div> <p>AIRSTEP has 5 local preset storage positions, so that 5 presets can be used when AIRSTEP is not connected to the APP, and the local presets can be cyclically switched through the multi-function button (FUNC key).</p> <p>After the APP is connected with AIRSTEP, the local preset number of AIRSTEP is displayed at the bottom of the screen, and you can click to switch. After loads or edits a preset, click the save button in the upper right corner to save the preset to the corresponding local preset strorage position.</p> <p><strong>Current Preset Indicating</strong></p> <p>AIRSTEP has the current preset indicating mode. If you want to enable this mode, press and hold the A footswitch when the AIRSTEP is powered off, and turn on the power switch. If the footswitch indicator flashes green to indicate the current preset, it means that this mode is enabled. The A-E footswitch indicator corresponds to Local Preset 1- 5. If you want to disable this mode, please repeat the above steps.</p> <p><strong>Attention:</strong> This function requires AIRSTEP to be at firmware version 1.6 or above. Connect AIRSTEP to the AIRSTEP APP, click Settings to view the firmware version information. </p>