Gsensor function turned on
<p>The platform sends instructions up and down to open the G-sensor
The instructions are as follows:</p>
<VariCfgSec Action="DEVICE_SET"><stOSD ucFD_GSensorEnable="1" /></VariCfgSec>
<p><strong>Note: After the Gsensor function is turned on, it needs to be calibrated before it can be used</strong></p>
<p>Calibration steps: (first turn on the Gsenor function, the device positioning is normal)</p>
<p>The vehicle speed is above 20KM/H, keep driving in a straight line on a flat road, driving in a straight line for more than 10s, after 20s, step on the brake pedal to brake to complete the calibration.</p>
<p>How to check the completion of calibration?</p>
<p>On the main interface (usually in the lower right corner), as shown in the figure below, Stn ACC Calibrated means that the calibration is not successful, and when it is displayed as Mtn ACC Calibrated, it means that the calibration is successful.
<img src="https://www.showdoc.com.cn/server/api/attachment/visitfile/sign/da863002c33741cc04c2f446df3188b0" alt="" />
The meaning of each alarm value is as follows:</p>
<p>Rollover: flip</p>
<p>Overturn: Overturn</p>
<p>Front Impact: crash</p>
<p>Rear Impact: rear-end collision (behind the car)</p>
<p>Left Impact: Left impact</p>
<p>Right Impact: Right Impact</p>
<p>Harsh Acceleration: Rapid acceleration</p>
<p>Harsh Braking: Braking hard</p>
<p>Left Harsh Cornering: Turn sharply to the left</p>
<p>Right Harsh Cornering: Turn sharply to the right</p>