2. 灯带列表

<h4>请求地址</h4> <ul> <li>正式环境: <a href="https://www.lampmind.com/api/lightStrip/getList">https://www.lampmind.com/api/lightStrip/getList</a></li> <li>测试环境: <a href="https://sd.solar-iot.com/api/lightStrip/getList">https://sd.solar-iot.com/api/lightStrip/getList</a></li> </ul> <h4>请求方法</h4> <p><strong>POST</strong></p> <h4>请求参数</h4> <table> <thead> <tr> <th>名称</th> <th>类型</th> <th>说明</th> <th>是否必须</th> </tr> </thead> <tbody> <tr> <td>username</td> <td>string</td> <td>用户名</td> <td>Y</td> </tr> <tr> <td>client_key</td> <td>string</td> <td>设备唯一码(imei)</td> <td>Y</td> </tr> <tr> <td>token</td> <td>string</td> <td>鉴权口令</td> <td>Y</td> </tr> <tr> <td>os</td> <td>string</td> <td>使用平台（0:PC, 1:iOS, 2:Android）</td> <td>Y</td> </tr> <tr> <td>areaId</td> <td>int</td> <td>区域筛选</td> <td>N</td> </tr> <tr> <td>sectionId</td> <td>int</td> <td>路段筛选</td> <td>N</td> </tr> <tr> <td>page</td> <td>int</td> <td>页码</td> <td>Y</td> </tr> <tr> <td>count</td> <td>int</td> <td>单页显示数量</td> <td>Y</td> </tr> <tr> <td>keyword</td> <td>string</td> <td>关键字搜索，可搜索灯带的名称或灯带的编号或灯带地址</td> <td>N</td> </tr> <tr> <td>online</td> <td>string</td> <td>在线状态（0 离线，1 在线）</td> <td>N</td> </tr> </tbody> </table> <h4>返回参数</h4> <table> <thead> <tr> <th>名称</th> <th>类型</th> <th>说明</th> <th>必须存在</th> </tr> </thead> <tbody> <tr> <td>status</td> <td>string</td> <td>返回码</td> <td>Y</td> </tr> <tr> <td>msg</td> <td>string</td> <td>返回信息</td> <td>Y</td> </tr> <tr> <td>data</td> <td>object</td> <td>结果数据</td> <td>Y</td> </tr> <tr> <td>total</td> <td>int</td> <td>灯带设备总数</td> <td>Y</td> </tr> <tr> <td>list</td> <td>array</td> <td>灯带设备列表</td> <td>Y</td> </tr> <tr> <td>lampPoleName</td> <td>string</td> <td>所属灯杆</td> <td>Y</td> </tr> <tr> <td>lamp_pole_id</td> <td>int</td> <td>灯杆id</td> <td>Y</td> </tr> <tr> <td>area</td> <td>string</td> <td>区域</td> <td>Y</td> </tr> <tr> <td>section</td> <td>string</td> <td>路段</td> <td>Y</td> </tr> <tr> <td>id</td> <td>int</td> <td>灯带设备id</td> <td>Y</td> </tr> <tr> <td>number</td> <td>string</td> <td>灯带设备编号</td> <td>Y</td> </tr> <tr> <td>name</td> <td>string</td> <td>灯带设备名称</td> <td>Y</td> </tr> <tr> <td>model</td> <td>string</td> <td>设备型号（0:WE-RGB-R10）</td> <td>Y</td> </tr> <tr> <td>online</td> <td>string</td> <td>灯带网络状态(0:离线,1:在线)</td> <td>Y</td> </tr> <tr> <td>online2</td> <td>string</td> <td>市电网络状态(0:离线,1:在线)</td> <td>Y</td> </tr> <tr> <td>online3</td> <td>string</td> <td>MPPT网络状态(0:离线,1:在线)</td> <td>Y</td> </tr> <tr> <td>address</td> <td>string</td> <td>灯带设备地址</td> <td>Y</td> </tr> <tr> <td>status</td> <td>string</td> <td>灯状态(0:关,1: 开)</td> <td>Y</td> </tr> <tr> <td>color</td> <td>string</td> <td>灯带颜色</td> <td>Y</td> </tr> <tr> <td>factory</td> <td>string</td> <td>厂家(0:云之声)</td> <td>Y</td> </tr> <tr> <td>cloud_box_model</td> <td>string</td> <td>云盒类型(G100,1 G200，2 G40，3 G300)</td> <td>Y</td> </tr> <tr> <td>serial_port</td> <td>string</td> <td>串口(0 3号串口，1 2号串口，2 1号串口)</td> <td>Y</td> </tr> <tr> <td>type</td> <td>string</td> <td>模式类型(0:常亮,1.呼吸,2.爆闪,4:闪烁)</td> <td>Y</td> </tr> <tr> <td>mode</td> <td>string</td> <td>模式(type为1时(1:红灯呼吸,2:绿灯呼吸,3:蓝灯呼吸,4:RGB 呼吸,5:黄灯呼吸,6:紫灯呼吸),type为2时(1.红灯爆闪,2:绿灯爆闪,3:蓝灯爆闪,4:白色爆闪,5:7色爆闪,6:黄灯爆闪,7:紫灯爆闪),type为4时(1.红灯闪烁,2:绿灯闪烁,3:蓝灯闪烁,4:白色闪烁,5:7色闪烁,6:黄灯闪烁,7:紫灯闪烁))</td> <td>Y</td> </tr> <tr> <td>modeStr</td> <td>string</td> <td>创建时间</td> <td>Y</td> </tr> <tr> <td>createtime</td> <td>string</td> <td>创建时间</td> <td>Y</td> </tr> <tr> <td>updatetime</td> <td>string</td> <td>更新时间</td> <td>Y</td> </tr> <tr> <td>powerSwitch</td> <td>string</td> <td>供电方式 （0 市电，1 电池）</td> <td>Y</td> </tr> <tr> <td>gridVolt</td> <td>string</td> <td>电压（V）</td> <td>Y</td> </tr> <tr> <td>gridCurr</td> <td>string</td> <td>电流（A）</td> <td>Y</td> </tr> <tr> <td>power</td> <td>string</td> <td>功率（W）</td> <td>Y</td> </tr> <tr> <td>freq</td> <td>string</td> <td>频率（Hz）</td> <td>Y</td> </tr> <tr> <td>usedEnergyTotal</td> <td>string</td> <td>用电量（kWh）</td> <td>Y</td> </tr> <tr> <td>gridVolt2</td> <td>string</td> <td>电压（V）（电池负载）</td> <td>Y</td> </tr> <tr> <td>gridCurr2</td> <td>string</td> <td>电流（A）（电池负载）</td> <td>Y</td> </tr> <tr> <td>power2</td> <td>string</td> <td>功率（W）（电池负载）</td> <td>Y</td> </tr> <tr> <td>usedEnergyTotal2</td> <td>string</td> <td>用电量（kWh）（电池负载）</td> <td>Y</td> </tr> <tr> <td>batVolt</td> <td>string</td> <td>电压（V）（电池）</td> <td>Y</td> </tr> <tr> <td>batCurr</td> <td>string</td> <td>电流（A）（电池）</td> <td>Y</td> </tr> <tr> <td>batPower</td> <td>string</td> <td>功率（W）（电池）</td> <td>Y</td> </tr> <tr> <td>solarVolt</td> <td>string</td> <td>电压（V）（太阳能板）</td> <td>Y</td> </tr> <tr> <td>solarCurr</td> <td>string</td> <td>电流（A）（太阳能板）</td> <td>Y</td> </tr> <tr> <td>solarPower</td> <td>string</td> <td>功率（W）（太阳能板）</td> <td>Y</td> </tr> <tr> <td>charge_type</td> <td>int</td> <td>电池充电状态（0 没有充电，1 启动充电模式，2 mppt充电模式，3 均衡充电模式，4 提升充电模式，5 浮充充电模式，6 限流（超功率））</td> <td>Y</td> </tr> <tr> <td>voltage</td> <td>string</td> <td>市电切换电压</td> <td>Y</td> </tr> <tr> <td>solarVoltage</td> <td>string</td> <td>太阳能电池切换电压</td> <td>Y</td> </tr> <tr> <td>policyid</td> <td>string</td> <td>策略id</td> <td>Y</td> </tr> <tr> <td>policyName</td> <td>string</td> <td>策略名称</td> <td>Y</td> </tr> </tbody> </table> <h4>返回内容实例</h4> <pre><code>{ "status":"0000", "msg":"操作成功", "data":{ "list":[{"id":10,"model":1}] "total":100 } }</code></pre>